Home / Journal / Certificate verification
How to verify a crochet supplier's certificates
Verifying a supplier's certificates means splitting every document into four questions and answering each one — who issued it, which model does it cover, when was it issued, and can it be found in the issuer's own system. In crochet toys, shipments are held up far more often by a document that does not match the goods than by a supplier who has no documents at all.
Two rule changes make this harder in 2026 than it was a year ago. In the United States, CPSC's revised 16 CFR Part 1110 takes effect on 8 July 2026 for imported and domestically produced goods: certificate data must be filed electronically with CBP through ACE at the time of entry, with foreign-trade-zone entries allowed until 8 January 2027. In the EU, the Toy Safety Regulation (EU) 2025/2509 entered into force on 1 January 2026 and applies in full from 1 August 2030, replacing Directive 2009/48/EC; a Digital Product Passport replaces the old declaration of conformity. Both regimes are moving the same way — documents that a machine can read and a buyer can re-check.
This is not a list of certificates (that lives on the TÜV and factory compliance page). It is about the half hour after a supplier sends you a folder of PDFs: how to tell whether it is real, whether it covers this order, and whether it still holds.
1. Three documents, not one · 2. Where to check the number · 3. Expiry is not printed · 4. Matching the model · 5. US: who signs the CPC · 6. EU: directive to regulation · 7. Five documents that fail · 8. Putting it in the process
1. Three documents, not one
Buyers use the word "certificate" for three things that are issued by three different parties, prove three different things, and fail in three different ways. Mixing them up is how a shipment arrives at a port with the wrong paper in hand.
| Document | Issued by | What it proves | How it fails |
|---|---|---|---|
| Test report | A third-party laboratory, typically operating to ISO/IEC 17025 | A specific sample was tested against a specific edition of a standard, and results were within limits | The standard is revised, the material or construction changes, the listed model is discontinued |
| Declaration of conformity (DoC / CPC / GCC) | The manufacturer or the importer, signing for itself | That the product complies with named regulations, on the basis of the reports behind it | The underlying report lapses, the signing entity changes, the regulation is updated |
| Management system certificate (e.g. ISO 9001) | A certification body accredited by an accreditation body | That the factory's system runs to a standard and passed an audit | It expires, the certification body loses accreditation, the scope excludes the product |
One sentence covers the table: a report is not a certificate, a certificate is not a report, and a system certificate never substitutes for a product report. An ISO 9001 certificate says the process is managed. It does not say the eye on this particular doll was pull-tested. A clean EN 71 report, in the other direction, says nothing about whether the factory can reproduce that result next month.
2. Where to check the number
The first move is always to copy the number off the page and look it up in the issuer's own system — not to look at a screenshot the supplier sent. Three directions.
System certificates: check the accreditation chain, not just the number
For ISO 9001 and ISO 14001, verify through the global database rather than the certificate PDF. IAF CertSearch does this by cross-checking three data sources: the certificate is valid, the certification body was accredited to issue it, and the accreditation body is a recognised member. Note the 2026 change — the International Accreditation Forum ceased operations on 1 January 2026 and its role passed to Global Accreditation Cooperation (Global ACI); the database and lookup entry points continue. Three fields have to land in the database: the legal company name (not the brand), the certificate number, and the scope.
A detail worth knowing: in crochet supply chains the brand, the trading company and the factory are often three different names. That is normal. But the certificate only covers the legal entity printed on it, so "same group" needs a document, not an assurance.
Test reports: check the lab, then the report
The first page normally carries the laboratory's name and address, a report number, sample receipt and test dates, and accreditation marks (CNAS, or a CPSC-accepted lab number for US children's products). The order is: confirm the lab held the right accreditation for these test methods, then ask for the full report rather than page one.
Report numbers usually embed a lab code and a year-month, which means you can read the issue date off the number itself. That is a practical way to settle "the report is recent" without an argument.
TÜV-type certificates: use the issuer's certificate database
TÜV Rheinland, TÜV SÜD and similar bodies publish online certificate lookups: enter the number and see the holder, the product scope and the current status. This is stronger than any screenshot because the supplier is not in the loop. It is also the logic we use when publishing our own audit and test information — publish the number, the scope and the date, and let the buyer check.
3. Expiry is not printed
"How long is this report valid?" has no legal answer, which surprises most first-time verifiers. A test report is not a licence. It records that on a given date, a given sample, against a given edition of a standard, produced a given result. So it has no expiry date — only a question of whether it still applies.
| Variable | What happens | What to do |
|---|---|---|
| Standard revision | Reports against superseded editions stop being accepted. US toy safety moved from ASTM F963-17 to ASTM F963-23; a report on the old edition will not support a current declaration | Read the edition cited on the report, not the page count |
| Product change | New yarn, new colour, new filling, new trim, new size can all fall outside the tested scope | Put change-triggered retesting into the order terms |
| Buyer or platform rules | Many retailers require reports within 12 months, which is commercial rather than statutory | Write "issued within X months" into the purchase contract instead of agreeing it verbally |
The first row is the one people miss, because a standard revision sends no notice to the factory. One morning a platform backend simply stops accepting the old edition. So verification needs a standing check — "does the report cite the current edition?" — which is independent of how new the report is. A report issued last month can cite a withdrawn edition.
4. Matching the model
The slowest and most expensive part of verification is confirming that the report covers the item you are buying. Four fields have to match exactly.
Applicant. The applicant on the report is often a trading company while production happens elsewhere. That is normal and also a risk point. The question to ask is whether the production site named in the report is the site making this order; if not, is there a documented subcontracting relationship.
Model and description. A report saying "plush toy" against an order for a 20 cm crochet doll is, strictly, insufficient coverage. Crochet models are usually distinguished by size band, yarn and trim, so the report should at least show the size band and main materials.
Material and colour. Chemical tests (migration, total lead, phthalates) are run on materials and coatings. A different dyed yarn, or a different coating batch, is technically a different test object. In practice one report often covers a colour family — provided the report names the colour list or the colour range.
Age group. Under-three and over-three requirements differ (small parts, pull force, warnings). The age on the report and the age marking on the packaging must agree; at a port inspection this is a hard checkpoint.
5. US: who signs the CPC
The most common US misconception is that the CPC is issued by the laboratory. It is not. The Children's Product Certificate is issued by the US importer or the domestic manufacturer — a self-declaration supported by testing at a CPSC-accepted third-party lab. Its elements include product identification, the rules and standards relied on, the identity of the manufacturer or importer, the records custodian, production date and place, test date and place, and the laboratory's details.
What changes in 2026 is filing. CPSC published the 16 CFR Part 1110 final rule on 8 January 2025 (90 FR 1800), requiring certificate data to be filed electronically through CBP's ACE system at entry: 8 July 2026 for imports and domestic manufacture, 8 January 2027 for goods entered from a foreign trade zone. The rule also states that each finished product certificate may describe only one product (16 CFR § 1110.13(a)).
Three practical consequences for buyers. First, a supplier offering "one certificate for the whole range" needs to show the basis for family grouping, not just the sheet. Second, the certificate must agree word-for-word with the test report, the product label and the entry data — any mismatch is a rejection risk. Third, electronic filing means data errors surface in a system immediately; the old space for fixing things with a paper file is narrowing.
One item that sits outside the certificate but gets checked alongside it: the tracking label. US rules require a permanent, non-removable mark on the product and packaging identifying manufacturer, address, production date, batch and age grading. Verify it with the sample, not with a document.
6. EU: directive to regulation
The EU framework is now in transition. Regulation (EU) 2025/2509 was published in the Official Journal on 12 December 2025, entered into force on 1 January 2026, and applies from 1 August 2030, when Directive 2009/48/EC is repealed. The change of legal form matters: a regulation applies directly, without 27 national transpositions, so enforcement converges.
| Change | Content | What it means for verification |
|---|---|---|
| Digital Product Passport | Every toy carries a unique digital identifier (for example a QR code) holding product, compliance, batch and CE information; it replaces the declaration of conformity and must be kept for 10 years | The first verification step shifts from "send me the PDF" to "scan the code"; whether a supplier can generate a DPP becomes an entry requirement |
| Tighter chemical limits | Intentional use of PFAS is banned and bisphenols are restricted; migration limits fall to 2.0 mg/kg for lead and 1.3 mg/kg for cadmium, roughly half the levels previously considered safe, with bisphenol A migration cut from 0.04 mg/L to 0.005 mg/L | An in-date report may still be insufficient to support a declaration under the new regulation |
Handling the transition is a question every order between 2026 and 2030 has to answer: file to the current directive now, and confirm the supplier can move to a DPP before 2030. It is worth asking today what a supplier's DPP plan is — the answer separates factories that have prepared from those that have not. Limits and dates here should be re-checked against the official text on EUR-Lex before an order is placed.
7. Five documents that fail
These five account for most of the bad paperwork in this category, and all five are identifiable in about two minutes.
Page one only. A real report runs to several pages: methods, sample description, itemised results, equipment and uncertainty, signatures. A first-page screenshot usually means the sender does not want you reading the results table.
Number not found. The number returns nothing in the lab's or certification body's lookup, or returns a different company. This one is decisive.
Superseded edition. The report cites ASTM F963-17, an old EN 71 edition, or a replaced directive article. This is the hardest to catch, because nothing has been forged — it simply went out of date and nobody said so.
Model mismatch. The report tests a hard plastic toy while the order is a crochet doll, or covers a 30 cm item when the order is a 12 cm keyring. Physical tests scale with size, so coverage does not stretch.
Third-party beneficiary. The certificate holder is another trading company with no equity or mandate link to the seller. In a factory audit or a platform appeal this is close to unexplainable.
8. Putting it in the process
Verification works as a standing step, not an occasional spot check. Five steps are enough.
Ask for a schedule, not a document. Request a compliance file index: product reports (number, standard edition, date, models covered), declarations (DoC / CPC / GCC), system certificates (number, scope, validity), and the production site each one refers to.
Check three databases. System certificates through IAF CertSearch (now under Global ACI); test reports through the lab's accreditation and the report number; TÜV-type certificates through the issuing body's own lookup.
Build the coverage schedule. Line up reports against model, colour and age group, and mark the gaps in red. That schedule is the basis for every later conversation.
Tie change to retesting. State in the order terms that new yarn, colour, filling, trim or size triggers a retesting decision by the factory, confirmed in writing before shipment.
Set a lapse reminder. Reports have no statutory expiry but do have a practical one. Set the reminder to the buyer's rule (commonly 12 months) rather than waiting for a platform backend to reject the file.
Our own approach follows the same logic: publish the number, the scope and the date, and let a buyer check for themselves rather than sending an impressive-looking scan. Being checkable is worth more than looking polished — which is also why we wrote about what a factory audit actually examines and how audit findings get closed. A claim that survives re-checking is the only kind worth putting in a contract.
Frequently asked
Do test reports have an expiry date?
There is no single legal expiry. A report records that a specific sample was tested on a specific date against a specific edition of a standard, so the question is whether it still applies. In practice buyers and platforms often require reports issued within 12 months; that is a commercial requirement, and it belongs in the purchase contract.
Is a CE certificate issued by a laboratory?
No. CE on toys is the manufacturer's declaration of conformity, supported by a technical file, with a notified body involved only where harmonised standards do not fully cover a risk. What to request is the declaration plus the supporting test reports, not a "CE certificate".
Who issues the CPC?
The US importer or the US manufacturer, as a self-declaration based on testing at a CPSC-accepted third-party laboratory. The laboratory issues the report only and carries no responsibility for the certificate. From 8 July 2026 the certificate data must also be filed electronically through ACE at the time of entry.
Can a supplier's ISO 9001 certificate replace product reports?
No. A system certificate shows the factory's process is managed; a product report shows a specific model was tested against a safety standard. The workable combination is a system certificate for consistency, product reports for this order, and a declaration that connects the two to the regulation.
Does a new yarn colour require retesting?
It depends on the report's scope. Chemical tests run on materials and coatings, and a dyed yarn is a material change; if the report names a colour list or range, a colour family in the same material and process can be covered, and anything outside it needs assessment. Confirm in writing at the change, rather than assuming the old report carries over.
Can existing reports be used once (EU) 2025/2509 applies?
The regulation entered into force on 1 January 2026 and applies from 1 August 2030, replacing Directive 2009/48/EC. Filing to the current directive remains valid during the transition, but chemical limits tighten (lead migration 2.0 mg/kg, cadmium 1.3 mg/kg), so some reports may not support a declaration under the new rules. Review annually rather than waiting for 2030.
A certificate answers what the product was tested to; a sealed sample answers what it was approved as. The sample chain is the physical half of the same technical file, and the half an authority asks for first.
A test report is one document in a pack that has to agree with itself. The export document pack sets out what else travels and which issuer corrects which paper when the descriptions diverge.
Need a specific report checked? Send the report number, standard edition, models covered and destination market, and we will run the four checks above and tell you where the gap is.